Precautions; Installing The Ap; Mounting On The Ceiling - Ruijie RG-SAP885-SP Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
3.3

Precautions

To ensure the normal operation and prolonged service life of the AP, observe the
following safety precautions:
Do not power on the device during installation.

Install the device in a well-ventilated location.

Do not subject the device to high temperatures.

Keep the device away from high-voltage power cables.

Install the device indoors.

Do not expose the device in a thunderstorm or strong electric field.

Keep the device clean and dust-free.

Cut off the power switch before cleaning the device.

Do not wipe the device with a damp cloth.

Do not wash the device with liquid.

Do not open the enclosure when the device is working.

Fasten the device tightly.

3.4

Installing the AP

Note
You are advised to install the device where you can get the optimal coverage.

In indoor areas, the signal coverage of a ceiling-mounted device is larger than that

of a wall-mounted device. Please choose the ceiling-mounting method first.
3.4.1

Mounting on the Ceiling

(1) Drill four 6.5 mm (0.26 in.) diameter holes in the ceiling, 53 mm (2.09 in.) apart. Tap
wall anchors into the holes, and drive screws through the mounting bracket into the
anchors to secure the bracket.
22
Installing the AP