Comtech EF Data XTRT-400C-BUC Operation And Installation Manual page 96

Set-up Overview
The Setup screens are used to customize the amplifier to meet user interface and
operational requirements. Entries made via the setup screens change the amplifier
default parameters and operation. These screens are used to:
•
Change the external RF inhibit polarity (NO/NC)
•
Test the external summary fault interface
•
Configure the Ethernet interface
•
Configure the RS232 (COM1) interface
•
Configure the RS485 (COM2) interface
•
Redundancy Mode
•
Set System identifiers for Ethernet connected systems
•
View sample port coupling factors
•
Select RF power alarm and fault limits
•
Select High Voltage state at start-up
•
Select system offset power readings
•
Set time and date
•
Set buzzer volume
•
Set touch-screen volume
•
Set Display Backlight level
•
Check power and attenuation calibration
•
Calibrate touch-screen
•
Update touch-screen firmware
•
Reboot main firmware
•
Redraw GUI
•
Access Factory Set-up options
•
Cathode Current Optimization
MNC-0400-071
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
Page 36 of 53
Operation
Revision 4