Comtech EF Data XTRT-400C-BUC Operation And Installation Manual page 84

Software selectable faults are generated by setting a fault or alarm level in the set-up menu as
described in the section of this chapter entitled "SETUP".
Maximum Power Alarm/Fault – Indicates the RF power out has exceeded the threshold
of the level selected.
Minimum Power Alarm/Fault –Indicates the RF power out has fallen below the
threshold of the level selected.
Maximum Reverse Power Alarm/Fault - Indicates the reflected RF power has exceeded
the threshold of the level selected.
MNC-0400-071
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
Page 24 of 53
Operation
Revision 4