Viewing Alarms - Honeywell CENTRALINE EAGLE User Manual

BASIC OPERATION PROCEDURES
EN2Z-0971GE51 R0515
Icon
NOTE:
To get information on the meaning of a status indicator, you can also press
the Help soft key.
5. The datapoint can be set into manual or auto mode as described in the
"Setting Datapoint into Manual Mode" section.
6. To exit the screen, turn the rotate&push button to navigate to and highlight
the Back command.
7. Then, push the rotate&push button.
8. Or, press the Back operating key on the controller housing.
Purpose View any of the following alarm information:
• actual points in alarm
• critical alarms
• non-critical alarms
• alarm buffer (history)
NOTE: The display of the alarms is not distinguished by their different information
type.
Procedure
1. In the HOME screen, turn the rotate&push button to navigate to and highlight
Alarm List
2. Push the rotate&push button.
The ALARMS menu is displayed.
Function
Datapoint is in alarm status "normal"
Datapoint is in alarm status "off-normal"
Datapoint is in alarm status "low-limit"
Datapoint is in alarm status "high-limit"
Datapoint is in alarm status "fault"
Multiple statuses can be indicated.
.
48
EAGLE CONTROLLER

Viewing Alarms