Honeywell CENTRALINE EAGLE User Manual page 9

EAGLE CONTROLLER
Options and Values
Status Indicators
Command Symbols and Soft keys
Fig. 2. List items, Status Indicators, Command Symbols with soft keys
NOTE: If a string of various length with the asterisk "*" should appear, this means
that currently no value is available.
A list item such as a datapoint can show a value which can be edited and/or options
such as the Manual mode which can be enabled/disabled.
Option: enabling/disabling
Value: editing
Depending their current status, datapoints can show one of the following visual
status indicators:
Datapoint is in "manual mode"
Datapoint is in "Overridden status"
Datapoint is in "Alarm status"
Datapoint is in alarm status "normal mode"
Datapoint is in alarm status "off-normal"
Datapoint is in alarm status "low-limit"
Datapoint is in alarm status "high-limit"
Datapoint is in alarm status "fault"
Fig. 4. Status indicator (Manu) of binary datapoint
At certain spots in the operating sequence, special command symbols are available.
The corresponding commands are executed by pressing the corresponding
operating key (soft key) to the immediate right on the housing.
Example: Displaying filter function in the datapoint list
Clicking on the topmost softkey
command symbol
The following command symbols are available:
9
BASIC OPERATION PROCEDURES
Fig. 3. Option and value of datapoint
opens the FILTER DATA POINTS screen.
adjacent to the filter
EN2Z-0971GE51 R0515