Table of Contents
Advertisement
EAGLE CONTROLLER
5. Push the rotate&push button.
The schedule is displayed.
6. Turn the rotate&push button to navigate to and highlight the day.
7. Push the rotate&push button.
The day with its switch points is displayed.
8. Turn the rotate&push button to navigate to and highlight the switch point you
want to edit.
9. Push the rotate&push button.
The EDIT EVENT screen is displayed.
10. Set the time and value as described in the "Adjusting and Saving Values and
Options" section and the "Enable/Disabling Options" sections.
11. Turn the rotate&push button to navigate to and highlight the OK command.
12. Push the rotate&push button.
The screen of the day redisplays showing the changed switch point.
73
BASIC OPERATION PROCEDURES
EN2Z-0971GE51 R0515
Advertisement
Table of Contents
