EAGLE CONTROLLER
11. Finish with step 26.
12. Edit the name of the date as described in the "Editing Text of New Entry"
section.
13. Push the rotate&push button. The following screen displays.
14. Turn the rotate&push button to navigate to and highlight Start date. Then
push the rotate&push button to enable the Start date option.
The current date is displayed.
15. Turn the rotate&push button to navigate to and highlight the date. Then push
the rotate&push button.
A calendar is displayed.
16. Set the date as described in the "Scrolling through Calendar" section.
17. Set the End date in the same way.
63
BASIC OPERATION PROCEDURES
EN2Z-0971GE51 R0515