Honeywell CENTRALINE EAGLE User Manual page 33

EAGLE CONTROLLER
c. Switch to the character library by pressing the soft key adjacent to the
Toggle command symbol
character library.
d. Turn the rotate&push button to navigate through the first line of the
characters library and highlight the character.
e. Push the rotate&push button.
The character is added to the title line.
f. To scroll through the lines of the character library including capitals,
lower case characters, numbers, and special signs, press the soft key
adjacent to the Scroll command symbol
desired character in the same way as described above.
g. If wrong characters have been added, they can be deleted at any time
by using the soft key adjacent to the Delete command symbol
h. After completing the title line, press the soft key adjacent to the Toggle
command symbol
3. Push the rotate&push button.
The new entry is saved and added to the CALENDAR menu.
33
BASIC OPERATION PROCEDURES
. The cursor jumps into the first line of the
. Then select and add the
. The cursor jumps back into the title line.
.
EN2Z-0971GE51 R0515