Table of Contents
Advertisement
BASIC OPERATION PROCEDURES
User Access Levels
EN2Z-0971GE51 R0515
5. Push the rotate&push button.
The schedule is displayed.
6. Press the soft key adjacent to the Exceptions command symbol
The EXCEPTIONS menu is displayed.
7. Turn the rotate&push button to navigate to and highlight the exception you
want to edit.
8. Push the rotate&push button.
The switch points of the exception are displayed.
Do any or many of the following:
– create new switch points (see "Adding Switch Point" section, p. 69)
– edit switch points (see "Editing Switch Point" section, p. 72)
– change the valid period of the exception (see "Setting Valid Period for
Exception" section, p. 35)
In CARE, password dependent user access levels are defined for particular
functions within the application.
The predefined access levels are arranged hierarchically and the sequence with
descending priority is as follows:
• System Administrator (128)
• Project Administrator (115)
• Building Engineer (96)
76
EAGLE CONTROLLER
.
User Options
Advertisement
Table of Contents
