Door Parts And Disassembly - Washer - Maytag MLE22PD Service Manual

DOOr parTS anD DiSaSSeMBlY - WaSHer

1. The door contains the outer lens, the outer
trim, the door handle, the inner trim, the
glass bowl, the hinge and the door hook.
nOTe: To avoid damage, lay a towel, or
another covering, on a work surface and
place removed hardware and tools on the
covering.
2. To disassemble the door, remove eight T-20
screws from inside the door.
3. The 3 screws on the hinge side are not
removed unless replacing the hinge.
4. Use a small flat blade screwdriver to
release the clips around the edge of the
outer door trim to start separating it from the
inner door.
5. Finish removing the outer door trim by
hand.
6. The door handle can now be removed from
the slots that are used to locate it on the
outer trim.
7. The outer door lens can then be lifted off
the front of the door assembly.
nOTe: The lens and the outer trim can
be removed together. The only reason to
separate them is if one of the parts needs
replacing; the lens, outer trim or door
handle.
4-49