Baffle Replace - Washer - Maytag MLE22PD Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the tub and spin basket assembly
(See page 4-78).
4. Pry 2 metal tabs up with a flat blade
screwdriver.
5. Slide the baffle to release the tabs from the
slots in the spin basket and remove it.
nOTe: It is not necessary to remove the
spin basket from the tub when replacing a
broken baffle. Just break off the old baffle
and remove all the broken parts. Make sure
the pry tabs are lowered toward the center
of the spin basket. Slide the new baffle into
the slots in the spin basket until it locks in
place behind the pry tabs.

BaFFle replaCe - WaSHer

4-81