Installation On The Pump With Canopy (For Eds200 And Eds300 Pumps) - Edwards EDS200 Instruction Manual

4.2 Installation on the pump with canopy (for EDS200 and EDS300
pumps)
Follow these steps to install the Flush kit /Solenoid valve on your pump:
1. Prepare the Flush kit / Solenoid valve for installation.
A.
B.
C.
2. Replace the plug screw with the adapter.
▪
1.
2.
A41892880_C
A41892880_C - Installation
Flush kit / Solenoid valve
Attach the bracket to the Flush kit / Solenoid valve with the hex head cap
screw
Flush kit / Solenoid valve with bracket
Note:
Do not fully tighten the hex head cap screw, so that the bracket position can
be adjusted.
Replace the plug screw adjacent to the pump inlet with the supplied adapter.
Plug screw
Adapter
Page 13 05/2021 - ©Edwards Limited