Installation On The Pump With Canopy (For Eds200 And Eds300 Pumps) - Edwards EDS200 Instruction Manual

4.2 Installation on the pump with canopy (for EDS200 and EDS300
pumps)
Follow these steps to install the Inlet purge / Solenoid valve on your pump:
1. Prepare the Inlet purge / Solenoid valve for installation.
A.
B.
C.
2. Replace the plug screw with the adapter.
▪
1.
2.
A41891880_C
A41891880_C - Installation
Inlet purge / Solenoid valve
Attach the bracket to the Inlet purge / Solenoid valve with hex head cap
screw
Inlet purge / Solenoid valve with bracket
Note:
Do not fully tighten the hex head cap screw, so that the bracket position can
be adjusted.
Replace the plug screw adjacent to the pump inlet with the supplied adapter.
Plug screw
Adapter
Page 12 05/2021 - ©Edwards Limited