Ej1859 - Technical Data - Beckhoff EJ18 Series Manual

3.8

EJ1859 - Technical data

Technical data
Number of channels
Nominal voltage of the inputs
Signal voltage "0"
Signal voltage "1"
Input current
Input filter
Distributed Clocks
Load type
Output current
Reverse voltage protection
Breaking energy (ind.) max.
Switching times
Current consumption via E-bus
Electrical isolation
Permissible ambient temperature range during operation
Permissible ambient temperature range during storage
Permissible relative humidity
Operating altitude
Dimensions (W x H x D)
Weight
Mounting
Pollution degree
Installation position
Position of the coding pins [} 35]
Color coding
Vibration/shock resistance
EMC immunity / emission
Protection class
Approvals / markings
CE approval
The CE Marking refers to the EtherCAT plug-in module mentioned above.
If the EtherCAT plug-in module is used in the production of a ready-to-use end product (PCB in con-
junction with a housing), the manufacturer of the end product must check compliance of the overall
system with relevant directives and CE certification.
To operate the EtherCAT plug-in modules, they must be installed in a housing.
EJ18xx
EJ1859
8 inputs + 8 outputs
24 V (-15% / +20%)
DC
-3 V .. 5 V (EN 61131-2, type 1/3)
15 V .. 30 V (EN 61131-2, type 3)
3 mA typ. (EN 61131-2, type 3)
3.0 ms typ.
-
ohmic, inductive, lamp load
max. 0.5 A per channel
yes
< 150 mJ/channel
T : 60 µs, T : 300 µs typ.
ON OFF
typ. 90 mA
500 V (E-bus/field voltage)
-25°C .. + 60°C (extended temperature range)
-40°C .. + 85°C
95%, no condensation
max. 2,000 m
approx. 12 mm x 66 mm x 55 mm
approx. 30 g
on signal distribution board
2
Standard [} 32]
2 and 3
yellow
conforms to EN 60068-2-6 / EN 60068-2-27 (with corresponding
signal distribution board)
conforms to EN 61000-6-2/EN 61000-6-4 (with corresponding sig-
nal distribution board)
EJ module: IP20,
EJ system: dependent on signal distribution board and housing
CE, EAC, UKCA,
UL
Version: 1.5
Product description
25