Table of Contents
Advertisement
3.2
EJ1809, EJ1819 - Technical data
Technical data
Number of inputs
Nominal voltage of the inputs
Signal voltage "0"
Signal voltage "1"
Input current
Input filter
Distributed clocks
Current consumption via E-bus
Electrical isolation
Permissible ambient temperature range during operation
Permissible ambient temperature range during storage
Permissible relative humidity
Operating altitude
Dimensions (W x H x D)
Weight
Mounting
Pollution degree
Installation position
Position of the coding pins [} 35]
Color coding
Vibration/shock resistance
EMC immunity / emission
Protection class
Approvals / markings
CE approval
The CE Marking refers to the EtherCAT plug-in module mentioned above.
If the EtherCAT plug-in module is used in the production of a ready-to-use end product (PCB in con-
junction with a housing), the manufacturer of the end product must check compliance of the overall
system with relevant directives and CE certification.
To operate the EtherCAT plug-in modules, they must be installed in a housing.
EJ18xx
EJ1809
16
24 V
(-15% / +20%)
DC
-3 V .. 5 V (EN 61131-2, type 1/3)
11 V .. 30 V (EN 61131-2, type 3)
typically 3 mA (EN 61131-2, type 3)
3.0 ms typ.
-
80 mA typ.
500 V (E-bus/field voltage)
-25°C .. +60°C (extended temperature range)
-40°C .. +85°C
95%, no condensation
max. 2.000 m
approx. 12 mm x 66 mm x 55 mm
approx. 30 g
on signal distribution board
2
Standard [} 32]
1 and 3
yellow
conforms to EN 60068-2-6 / EN 60068-2-27 (with corresponding
signal distribution board)
conforms to EN 61000-6-2/EN 61000-6-4 (with corresponding sig-
nal distribution board)
EJ module: IP20,
EJ system: dependent on signal distribution board and housing
CE, EAC, UKCA,
UL
Version: 1.5
Product description
EJ1819
10 µs typ.
19
Advertisement
Table of Contents
