Using The Fh-869S Holder For Brownie Film - Nikon SUPER COOLSCAN 8000 ED User Manual

Hide thumbs Also See for SUPER COOLSCAN 8000 ED:
Table of Contents

Advertisement

Using the FH-869S Holder for Brownie Film

The FH-835M is used when scanning medium-format (120/220) or 59 mm × 82 mm film for electron
microscopes. The number of frames that can be scanned depends on the type of film:
6 × 4.5:
up to four frames
6 × 9:
up to three fr ames
6 × 7–6 × 9: up to two frames
Insert your fingers in the depressions and unlatch the hooks, then open the upper holders.
Cautions
Use only one type of film at a time. Do not place negative and positive film in the holder at the same time.
Be sure to place the end of the film against the stop. Leaving a gap between the film and the stop could
interfere with accurate color reproduction.
To avoid damaging the film, use a blower to remove dust and lint from the film and holder. Leaving dust, lint,
or other foreign objects on the film or holder during scanning could result in reduced image quality or in
damage to the film.
78

Advertisement

Table of Contents
loading

Table of Contents