VRA51701-R.3607.A
Stage carriage unit
・ Disconnect the connector of the holder motor by pulling it in the
direction indicated by the arrow.
・ Remove the holder motor unit by taking out 3 screws (#194).
・ Take out 4 screws (#194) and remove 4 retaining springs (#104).
・ Take out 2 screws (#191) then the stage carriage comes off with 2
guide shafts (#123) attached.
Connector
・ Pull out 2 guide shafts (#123).
#194×3
#194×3
Stage carriage
Holder motor unit
#191×3
#194×4
#104×4
#123×2
Screw shaft
- D4 ・
-
LS-9000