Table of Contents
Advertisement
Confirming That the Device Driver Is Correctly Installed (Windows 98SE)
1
Make sure that your scanner is connected to
your computer and turned on.
2
From the Start menu, select Settings >
Control Panel. Double-click the System
icon in the window that appears.
3
The System Proper ties dialog will be displayed.
Click the Device Manager tab.
4
Your Nikon Scanner should be listed as an im-
aging device. If an "Imaging Device" item ap-
pear s, click the "+" mark next to the item to
view a list of imaging devices.
5
Double-click the listing for your scanner. If your
scanner is not listed as an imaging device, pro-
ceed to "Updating the Device Dr iver (Win-
dows 98SE)."
6
The properties window for your scanner will
be displayed. If "This device is wor king prop-
erly" appear s under "Device status" in the
General tab, the device driver for your scan-
ner is installed and functioning normally. If a
message such as, "The drivers for this device
are not installed" appears, proceed to "Updat-
ing the Device Driver (Windows 98SE)."
33
Advertisement
Table of Contents
