Table of Contents
Advertisement
Installing the Drivers for the IEEE 1394/Firewire Interface Board (Windows Only)
After installing the interface board in a PCI slot, closing the computer's case, and reconnecting the
cables, turn the computer on and install the board drivers as described below.
Windows 98 SE
Step 1
The first time the computer is powered on with
the board in place, the dialog shown at right will
be displayed. Click Next.
Step 2
Select Search for the best driver for your
device (Recommended) and click Next.
Step 3
The dialog shown at right will be displayed. After
making sure that none of the options are selected,
click Next.
A-4
Advertisement
Table of Contents
