Cleaning the Scanner
Before cleaning the scanner, turn it off and unplug the power cord. The front of the scanner is made of
plastic, and consequently cannot be cleaned with volatile cleaners such as alcohol or paint thinner. Use
a blower to blow off dust or wipe the surface with a dry cloth. Remove dirt from the metal rear panel
of the scanner using a soft, dry cloth. If this is not sufficient to remove all dirt, clean with a cloth that has
been slightly dampened with a neutral deter gent or liquid soap.
Transporting the Scanner
Follow the steps below to prepare the scanner for transpor t.
1.
Turn the scanner on and remove any holders.
2.
Close the sliding cover.
3.
Wait for the status LED on the front of the scanner to stop blinking.
4.
Turn the scanner off.
5.
Disconnect the power and interface cables.
6.
Package the scanner in the original packing mater ials.
Caution
Nikon scanners are cer tified for use in the country or region of sale. Transportation and use outside the
country or region of sale are at the user's own risk and responsibility.
Caution
Where the original packing materials are not available, package the scanner carefully in materials at least
as shock resistant as the originals.
104