Using the FH-869GR Glass-Covered Rotating Holder for Brownie Film
The FH-835G is used when scanning medium-format (120/220) film, 59 mm × 82 mm film for electron
microscopes, or 24 × 65 panorama film. Film can be adjusted by ± 5° to compensate for camera angle.
Multi-frame strips can be scanned one frame at a time without cutting the film into strips one frame
long.
Slide the knob in the direction shown below and open the upper cover.
Glass cover
Sliding knob
Place a masking sheet appropriate to the size of film to be scanned in the holder, aligning the holes in the
masking sheet with the guide pins in the holder. Place the film between the guide rails, with the matte
emulsion surface down (shiny side up). Align the frame to be scanned with the aperture in the masking
sheet. Close the upper cover so that the latch clicks into place.
Guide pins
Masking sheet
91