Step 2: Choose A Location; Installing The Scanner - Nikon SUPER COOLSCAN 8000 ED User Manual

Step 2: Choose a Location

Installing the Scanner

Before connecting the power and interface cables, choose a flat, stable location for your scanner close
to the computer and to a suitable power outlet. Do not install your scanner where:
• it would be exposed to direct or reflected sunlight
• it would be subject to condensation or to drastic changes in temperature
• it would be exposed to dust or smoke
• it would be exposed to water vapor from a humidifier
• it would be exposed to radio interference from other electronic devices
• the temperature exceeds 35°C (95°F) or falls below 10°C (50°F)
• other objects would block the scanner's vents
Leave enough space around the scanner to ensure ease of operation: at least 5 cm (2˝) above and on
either side of the scanner, 10 cm (4˝) behind, and 50 cm (20˝) in front.
5cm (2˝)
10cm (4˝)
5cm (2˝)
5cm (2˝)
50cm (20˝)
Caution
When the scanner is not being used, remove any film holders and close the slot cover.
14