Table of Contents
Advertisement
Masking Sheets
When scanning film strips one at a time, be sure to cover the remaining apertures with a masking sheet.
Make sure to place the film strip on the left side and the mask strip of the right side with respect to the
direction of insertion as shown below.
Direction of
insertion
When scanning two str ips of different lengths, cover any open apertures by cutting a masking sheet into
the appropriate lengths and placing it over the aper tures. Leaving aper tures open when scanning film
of different lengths can interfere with accurate color reproduction.
When scanning two film strips containing less than six frames but of equal length, place the film so that
it covers the apertures at the end of the holder that will be inserted in the scanner.
Direction of
insertion
Leaving the aper tures at the front of the holder uncovered can interfere with accurate color reproduction.
72
Masking sheet
Masking sheet
Advertisement
Table of Contents
