Fh-816 Holder For 16-Mm Film; Inserting Film - Nikon Super Coolscan 900ED User Manual

FH-816 Holder for 16-mm Film

FH-816 Holder for 16-mm Film

The FH-816 is used to scan up to three strips of 16-mm fi lm. Each strip can be from one to
twenty frames in length.

Inserting Film

1
Open the holder
Insert your fi ngers through the holes in
the bottom half of the holder and undo
the latches, then open the holder.
2
Insert fi lm
Place fi lm in the holder base up (
Align the fi rst frame in each strip with an
aperture at the left end of the holder.
Use Only One Type of Film
Do not place negatives in the holder with
positive fi lm.
Inserting Film and Masking Sheets
Do not place fi lm or masking sheets so that they protrude from the holder or overlap the fi lm guides.
Failure to observe this precaution may cause the holder to jam in the scanner.
Digital ROC, Digital GEM, and
These functions can not be used with 16-mm fi lm.
58
26).
Arrow
Direction of
insertion
Digital DEE ( 50)
Latches