Using The Fh-869S Holder For Brownie Film - Nikon LS8000 User Manual

Using the FH-869S Holder for Brownie Film

The FH-869S is used when scanning medium-format (120/220) or 59 mm
electron microscopes. The number of frames that can be scanned depends on the type of film:
6 4.5:
6 9:
6 7–6 9:
Insert your fingers in the depressions and unlatch the hooks, then open the upper holders.
Cautions
Use only one type of film at a time. Do not place negative and positive film in the holder at the
same time.
Be sure to place the end of the film against the stop. Leaving a gap between the film and the
stop could interfere with accurate color reproduction.
To avoid damaging the film, use a blower to remove dust and lint from the film and holder.
Leaving dust, lint, or other foreign objects on the film or holder during scanning could result in
reduced image quality or in damage to the film.
90
up to four frames
up to three frames
up to two frames
82 mm film for