Table of Contents
Advertisement
Updating the Device Driver (Windows 98SE)
1
Open the Device Manager as instructed in
steps 1–3 of "Confir ming That the Device
Driver Is Correctly Installed (Windows 98SE). "
2
If your scanner is listed under "Unknown de-
vices" or "Other devices, " or appears next to a
"?" "!" or "x," double-click the scanner icon to
open the proper ties window for the device.
3
Click Reinstall driver... in the Gener al tab
of the properties window.
4
The Update Device Driver Wizard dialog will
appear. Click Next.
34
5
Select Search for a better driver than the
one your device is using now and click
Next.
6
With the shift key held down to prevent the
installer from starting automatically, insert the
Nikon Scan 3.1 CD into a CD-ROM drive.
Select Specify a location in the dialog be-
low and click Browse. (If the Welcome dialog
appears when the CD is inser ted in the drive,
click Exit and proceed with driver installation.)
7
In the Browse for Folder dialog, select the fol-
lowing folder on the Nikon Scan 3.1 CD
(Nkscan):
\INF\8000ED\Win98SE
Click OK. This will return you to the dialog
shown above; click Next.
8
The Update Device Driver Wizard will an-
nounce that it has found the drivers for your
scanner; click Next.
9
When a message is displayed indicating that
driver installation is complete, click Finish to
exit the wizard.
Advertisement
Table of Contents
