7 Installation
Completing electrical installation
7.10 Completing electrical installation
If you have connected a PC for commission-
ing (see "7.7.7 Connecting a PC via RS485
(optional)", page 75), you must disconnect the
PC from the inverter again after commissioning
(see "8.2 Commissioning with the Delta Service
Software (DSS)", page 84)!
82
1. Remove the Allen key from the top of the door.
2. Close the door.
3. Close the upper door latch and screw on the cover.
Installation and Operation Manual M50A_260 RPI503M260000 Product version L and M EU V1.3 EN 2023-08-14