Type Plate And Markings - Delta M50A-260 Installation And Operation Manual

4.12 Type plate and markings

Fig. 4.25: Type plate and markings
Information on the type plate
M50A_260
P/N: RPI503M260000
DC INPUT
200–1000 Vdc
MPPT 460-800Vdc
Max. total Idc: 132A (26A/MPPT)
1000 V DC max
MAX Isc: 50A*6 MPPT
AC OUTPUT
220/380, 230/400 Vac
3P3W or 3P4W
50/60 Hz
111.6A max
cosφ 0.8ind~0.8cap
70kW/70kVA nom
77kW/77kVA max
IP65 (Electronics)
Protective Class: I
Over Voltage Category: AC: III / DC: II
Made in China
VDE-AR-N 4105
VDE-AR-N 4110
Installation and Operation Manual M50A_260 RPI503M260000 Product version L and M EU V1.3 EN 2023-08-14
Meaning
Delta model name
Delta part number
DC Input
DC input voltage range
MPP input voltage range with full power (with symmetrical load)
Maximum DC input current per MPP tracker
Maximum DC input voltage
Maximum DC short-circuit current per MPP tracker
AC Output
AC nominal voltage
The inverter can be connected to 3-phase grids without neutral conductors (3P3W,
3 phases + PE) and 3-phase grids with neutral conductors (3P4W, 3 phases + N +
PE).
AC nominal frequency
Maximum AC current
Setting range of the power factor cos φ
Nominal active power/reactive power
Maximum active power/reactive power
Protection class for the electronics as per EN 60529
Safety class as per EN 61140
Overvoltage category for AC and DC as per EN 50539-11
The device was made in China.
The inverter fulfills the requirements of VDE-AR-N 4105.
The inverter fulfills the requirements of VDE-AR-N 4110.
CE mark. By applying this mark, Delta declares that the inverter satisfies the provi-
sions of the applicable EU directives.
4 Product overview
Type plate and markings
27