Sequence Of Work Steps; Tools Required - Delta M50A-260 Installation And Operation Manual

13.2 Sequence of work steps

Step
Disconnect the inverter from AC and DC
Remove the communication cable
Dismantling the type 1+2 combined AC
surge protection device
Dismantling the type 1+2 combined DC
surge protection device
Dismantle the Sub-1G antenna
Dismantle the Wi-Fi module
Removing the inverter
Pack the inverter

13.3 Tools required

In addition to standard tools such as screwdrivers, open-ended
wrenches, Allen keys and socket wrenches in various sizes, the
following tools are required for working on the inverter:
●
Mounting tool for disconnecting the Amphenol plug connec-
tors from the DC cables (included in the scope of delivery)
Installation and Operation Manual M50A_260 RPI503M260000 Product version L and M EU V1.3 EN 2023-08-14
Notice
Only necessary if installed.
Only necessary if installed.
Only necessary if installed.
Only necessary if installed.
13 Replacing the inverter
Description in chapter
"13.4 Disconnecting the inverter from the grid (AC)
and solar modules (DC)", page 150
"13.5 Remove the communication cable", page 155
"13.6 Dismantling the type 1+2 combined AC surge
protection device (optional)", page 156
"13.7 Dismantling the type 1+2 combined DC surge
protection device (optional)", page 156
"13.8 Dismantling the Sub-1G antenna (optional)",
page 157
"13.8.1 Dismantling the Wi-Fi module (optional)",
page 157
"13.9 Removing and packing the inverter",
page 158
"13.9 Removing and packing the inverter",
page 158
149