11.2 General information
For the following work, the inverter must be disconnected from
the power supply.
●
Clean/replace internal fans
●
Cleaning/replacing the fan module
●
Replacing the DC surge protection devices
●
Replacing the AC surge protection devices
●
Replacing the Wi-Fi module
Perform the instructions listed in chapter "10. Disconnecting the
inverter from the power supply before working on it", page 91
before you start work on the inverter!
The following work can be carried out on a running inverter.
●
Cleaning the air outlets
●
Replacing the Sub-1G antenna
Installation and Operation Manual M50A_260 RPI503M260000 Product version L and M EU V1.3 EN 2023-08-14
11 Replacing or cleaning components, installing accessories
General information
99