Table of Contents
Advertisement
8 – Language Dictionary
ABORt
CALibrate
:CURRent
[:SOURce]
[:DC] [:POSitive]
:NEGative
:MEASure
[:DC] :LOWRange
:AC
:DATA <n>
:LEVel <level>
:PASSword <n>
:SAVE
:STATE <bool> [,<n>]
:VOLTage
[:DC]
:PROTection
DISPlay
[:WINDow]
[:STATe] <bool>
:MODE <mode>
:TEXT [:DATA] <string>
INITiate
[:IMMediate]
:SEQuence[<n>]
:NAME <name>
CONTinuous
:SEQuence1, <bool>
:NAME TRANsient, <bool>
MEASure | FETCh
:ARRay
:CURRent [:DC]?
:VOLTage [:DC]?
[:SCALar]
:CURRent [:DC]?
:ACDC?
:HIGH?
:LOW?
:MAX?
:MIN?
:VOLTage [:DC]?
:ACDC?
:HIGH?
:LOW?
:MAX?
:MIN?
78
Table 8-1. Subsystem Commands Syntax
Resets the trigger system to the Idle state
Calibrate positive output current and high current measurement range
Calibrate negative output current
Calibrate low current measurement range
Calibrate ac current measurement circuits
Input a calibration measurement
Advance to next calibration step (P1 | P2)
Set calibration password
Save new cal constants in non-volatile memory
Enable or disable calibration mode
Calibrate output voltage and voltage readback
Begin voltage protection calibration sequence
Enable/disable front panel display
Set display mode (NORM | TEXT)
Sets the text that is displayed
Initiate a specific numbered sequence (1 | 2)
Initiate a specific named sequence (TRAN | ACQ)
Set continuous initialization
Set continuous initialization
Returns the digitized instantaneous current
Returns the digitized instantaneous voltage
Returns dc current
Returns the total rms current (ac+dc)
Returns the HIGH level of a current pulse
Returns the LOW level of a current pulse
Returns maximum current
Returns minimum current
Returns dc voltage
Returns the total rms voltage (ac+dc)
Returns the HIGH level of a voltage pulse
Returns the LOW level of a voltage pulse
Returns maximum voltage
Returns minimum voltage
Advertisement
Table of Contents
