Table of Contents
Advertisement
Compatibility Language
Introduction
The HP 66311A dc source covered by this manual is programmatically compatible with the HP 6632A,
6633A, and 6634A dc power supplies. This means that by using COMPatibility language mode you can
program the HP 66311A over the HP-IB using COMPatibility commands.
To switch from SCPI commands to COMPatibility commands (and vice versa), use the SYST:LANG
command, as documented in chapter 8. The language setting is saved in non-volatile memory.
Table F-2 summarizes the COMPatibility commands. You may need to refer to the HP Series 6632A,
6633A, and 6634A Operating Guide (HP p/n 5957-6360) for complete information on the COMPatibility
commands.
The rest of this appendix discusses the COMPatibility language status system, and the COMPatibility
language error codes.
NOTE:
For complete information on the Compatibility programming language, order the HP
6632A/6633A/6634A Operating manual, HP p/n 5957-6360.
Command
DC
DLY
DSP
ISET
OCP
OUT
OVSET
Table F-1. COMPatibility Power-on Settings
Setting
1 (ON)
8 ms (fast)
80 ms (normal)
1 (ON)
0.04 A (66311A)
0.02 A (6632B)
0.008 A (6633B)
0.004 A (6634B)
OFF
1 (ON)
MAX
Command
Setting
POL
1 (normal)
PON
last stored value
RELAY
1 (close)
RLYPON
1 (close)
SRQ
UNMASK
VSET
0
0
0 V
F
149
Advertisement
Table of Contents
