Starting A Measurement; Download The Profometer App And Create Eagle Account - Proceq PM8500 User Manual

Profometer corrosion

Table of Contents

the Rod Electrode or the felt hoops on the wheel electrode are sufficiently moistened. In this

case, when making a measurement, the probe must be held against the surface until a stable

end value is reached. (If the surface is dry at the beginning of the measurement, it must be

moistened by the sponge on the probe so a stable value will not be present initially.) This is

only possible with the Rod Electrode.

Proceq provides an additional sponge that connects to the rod electrode to increase the overall

surface contact area, to prevent testing immediately above a large aggregate.

In the case of the wheel electrode with its continual automatic measurement, it is not possible

to monitor whether or not the measured value is stable. Therefore, it is recommended to pre-

moisten the surface in sections and to measure in intervals of a few minutes.

4.2 Starting a measurement

This app downloadable for free in the Apple Store. To do so, you need to have one compatible

iPad (see the most recent information for compatible iPads at Screening Eagle website).

25. September 2023

Figure 16 : PM8500 Profometer App: Download Link

Table of Contents