How To Mount The Sensor On The Harness - Proceq PM8500 User Manual

4.1.7 How to mount the sensor on the harness

PM8500 includes a chest harness to carry the iPad, helping the user for free hands operation.
This harness is also very useful to carry the sensor unit when using the rod electrode. To do
so, you can use the universal holder, and connect the inner clamp to the harness belt.
If you do not want to use the iPad harness, you can always clip the holder to your trouser
pocket, or belt.
Figure 10 : PM8500 Universal Holder for Rod Electrode
Should you be using the one wheel or the four-wheel electrode, you can mount the universal
holder to the telescopic rod.
Figure 11 : PM8500 Universal Holder for Wheel Electrodes
25. September 2023 © Copyright 2023, PROCEQ SA 18