Pictograms; Signal Strength Indicators And Measurement Method - Proceq Zonotip Operating Instructions Manual

Using the Keys in the Active mode
Operation Pictogram

4.2 Pictograms

4.2.1 Signal Strength Indicators and Measurement Method (Norm Mode and
Memory Mode only)
Signal level is maximal
Signal level is average
Signal level is minimal
No signal
No measurements
Measurement using the ACF method (see chapter 4.2.2)
Measurement using the threshold method (see chapter 4.2.2)
Overwrite mode (see chapter 4.1.3)
© 2014 Proceq SA
Key Purpose
Change of gate length
Vertical position of the gate
Horizontal position of the gate
Zoom in on the A-Scan
Set the signal gain in decibel
Horizontal scrolling of the signal on the screen
Set the signal gain in decibel
13