1 Introduction
Profometer PM8500 Corrosion is a high-quality instrument used to measure the likelihood of
corrosion using the half-cell potential method.
The product consists of:
the PM8500 high-performance sensor unit,
the electrodes (rod, one wheel and four wheel),
the Profometer iOS app,
and the Screening Eagle Workspace platform.
Figure 1: PM8500 System
The PM8500 sensor can be used in the following configuration:
Wirelessly connected sensor via low power Bluetooth to the iPad, which runs the
Profometer app. Given mobile data connectivity (Wi-Fi or mobile network), the pm app
automatically and safely stores all measurements on the Screening Eagle Workspace.
1.1 Scope of this document
This document is the user manual for all products of the PM8500 Product family.
25. September 2023
© Copyright 2023, PROCEQ SA
6