Table of Contents
Advertisement
SUPERSERVER 2027TR-H70RF/H70FRF/H70QRF USER'S MANUAL
In the unlikely event your power supply fails, replacement is simple and can be
accomplished without tools.
SAS/SATA Subsystem
The SC217 supports up to twenty-four (24) 2.5" hot-swap SAS/SATA drives in trays
(6 for each node). These drives are hot-swappable units and are connected to a
backplane that provides power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the drives.
Front Control Panel
SC217 models include four front panels on the handles of the chassis which control
each of the systems. Each control panel on the 2027TR-H70RF/H70FRF/H70QRF
server provides you with system monitoring and control for one server node. LEDs
indicate system power, HDD activity, network activity, system overheat and power
supply failure. A main power button and a system reset button are also included.
I/O Ports
The SC217 chassis designed to be used in a 2U rackmount confi guration. The
SC217 chassis provides a low-profi le add-on card slot, a COM port, a VGA port,
two USB 2.0 ports and two gigabit Ethernet ports per node.
Cooling System
The SC217 chassis accepts four system fans, which are powered from the
backpane.
Air Shrouds
The SC217 chassis includes four plastic air shrouds that direct the airfl ow where
cooling is needed on each serverboard. Always use the air shroud included with
your chassis on each serverboard.
Mounting Rails
The SC217 includes a set of quick-release rails, and can be placed in a rack for
secure storage and use. To setup your rack, follow the step-by-step instructions
included in this manual.
1-4
Advertisement
Table of Contents
