Disconnecting The Battery Charging Cable - Energizer EZG2000iUK User Manual

 NEVER reverse the polarity when connecting the battery
terminals to the charging jack. Severe damage may occur to
the generator and battery.
 Do not start the vehicle while the battery charging cable is
connected and the generator is running. The vehicle or the
generator may be damaged.
 An overloaded DC circuit or a wiring problem will trip the DC
Circuit Breaker 6(PUSH button extends out). If this happens,
wait a few minutes before pushing in the DC Circuit Breaker 6
to resume operation. If the DC Circuit Breaker 6 continues to
go OFF, discontinue charging and contact your authorized
generator dealer.

7.2 DISCONNECTING THE BATTERY CHARGING CABLE:

(1). Turn the Engine Switch to "OFF" position to stop the engine.
(2). Disconnect the Black Charger Jack of the Battery Charging Cable
from the negative (-) battery terminal.
(3). Disconnect the Red Charger Jack of the Battery Charging Cable
from the positive (＋) battery terminal.
(4). Disconnect the Battery Charging Cable from the 12V DC Receptacle
of the generator.
(5). Connect the vehicle battery ground cable to the negative (-) battery
terminal.
- 45 -