Table of Contents
Advertisement
NOTE
Wait a few seconds until the engine speed is stable before closing
the choke, and more time waiting if weather is cold.
6. AC OPERATION
6.1 USE THE GENERATOR:
After starting the engine, let it run for 2 or 3 minutes to warm up,
then you can use the generator as follows:
(1). Make sure the READY LED (green) 4 comes on.
(2). Turn the ECO Switch 1 to "ON" position to use Economy Control
System. This system controls the engine speed according to the
connected load. The results are better fuel consumption and less noise.
(3). Connect plug to the generator AC Receptacles 2 for AC electric
devices.
(4). Turn on the electric devices for operation.
3
- 39 -
2
1
4
5
Advertisement
Table of Contents
