Energizer EZG2000iUK User Manual page 18

•
Do not transport or move the generator until it has cooled down.
•
Perform periodic maintenance and resolve problems that appear immediately.
Do not run the generator before correcting any fault detected.
•
The generator uses a system of air-cooling, and it is necessary to clean its
components regularly, including the grilles, the cover of the fan and the fan
itself so as to ensure cooling.
•
Keep the fuel filter clean, and change the oil of the motor regularly.
•
Periodically check the installation of the connections and the tightness of the
fixations, re-tightening them if necessary.
•
Clean the components of the air filter periodically, and replace the air filter
when necessary.
•
Remove any electrical equipment that is plugged in before starting or stopping
the generator.
•
Before transporting the generator, you must empty the fuel tank.
•
Maintenance and repair of the generator must be carried out by a qualified
technician from an authorized after-sales service center.
•
The generator must not be altered or modified. Any intervention must be done
by an authorized after-sales service center.
•
Installation and major repair work shall be carried out only by specifically
trained personnel
Warning: when you start the generator with the cord, watch out for sudden changes in
the rotation of the motor!!! Risk of wounding!!! Never cover the generator when it is
running. The cut-out mounted on the generator has the aimed of reducing the risk of
- 18 -