Dc Operation - Energizer EZG2000iUK User Manual

NOTE
 TURN OFF all electrical loads connected to the generator AC
Receptacles 1 before shutting down by Gen-mate APP in
smartphones.
 If shutting down by Gen-mate APP in smartphones, the above
step 2/3 is unnecessary, and step 4 should be done before
moving or storing the generator.
 Always allow the generator to cool off before moving or
storing. High temperatures will be present at the rear of the
unit for some time after shutdown.
 DO NOT turn the Fuel Cap Vent Lever 4 to "OFF" position
before cooling the engine.
not, the fuel tank can be crushed by cold contraction of the
fuel gas in the fuel tank.

7. DC OPERATION

Never smoke, open flame sparks or make and break

connections at the battery while charging. Sparks may ignite
the battery gas. Batteries give off explosive hydrogen gas while
recharging. Provide adequate ventilation when charging or
using batteries.
 Wear protective goggles and gloves when working around a
battery. Battery electrolyte is an extremely corrosive sulfuric
acid solution that can cause severe burns. Avoid contact with
skin, eyes or clothing. If a spill occurs, flush area with clear
water immediately.
Allow the engine to cool well, if
- 43 -