Interface Description; Dvi; Fig. 4 Cp27Xx_Connection Section; Fig. 5 Cp27Xx_Dvi Port Pin Numbering - Beckhoff CP2712 Manual

3.2

Interface description

In the basic configuration, the panel PC includes the following interfaces:
• DVI (X103)
• USB (X104 - X107)
• Ethernet RJ45 (X108, X109)
• Power supply (X110)
The interfaces are located on the rear side of the panel PC at the bottom in the connection section.
Fig. 4: CP27xx_connection section
3.2.1

DVI

The panel PC is equipped with a DVI connector (X103) to which a DVI-capable monitor can be connected.
Only digital signals are transmitted.
X103
1 8
9 16
17 24
Fig. 5: CP27xx_DVI port pin numbering
Table 3: DVI interface pin assignment
Pin Assignment
1 TDMS Data 2 -
2 TDMS Data 2 +
3 TDMS Data 2/4 Shield
4 not connected
5 not connected
6 DDC Clock
7 DDC Data
8 Analog Vertical Sync
CP27xx
Pin Assignment
9 TDMS Data 1 -
10 TDMS Data 1 +
11 TDMS Data 1/3 Shield
12 not connected
13 not connected
14 + 5 V Power
15 Ground (+ 5 V, Analog H/
V Sync)
16 Hot Plug Detect
Version: 2.0
Product overview
Pin Assignment
17 TDMS Data 0 -
18 TDMS Data 0 +
19 TDMS Data 0/5 Shield
20 not connected
21 not connected
22 TDMS Clock Shield
23 TDMS Clock +
24 TDMA Clock -
13