DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Connections Setup
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the Connections Setup / WAN page, you can create and edit connections used by the router.
By default, Ethernet, VDSL, and ADSL connections of the Dynamic IPv4 type are configured in
the system. They are assigned to the WAN and DSL ports of the router correspondingly. You can
edit these connections or delete them.
!
Please reboot the router after creating, editing, or removing an ADSL WAN connection.
Figure 71. The Connections Setup / WAN page. The advanced mode.
To create a new connection, click the ADD button (
that the connection creation page opens.
To edit an existing connection, in the Connections List section, left-click the relevant line in the
table. On the opened page, change the needed parameters and click the APPLY button.
) in the Connections List section. Upon
Page 89 of 372
Configuring via Web-based Interface