Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Auto Configuration of 3G/LTE
On the Connections Setup / Auto Configuration of 3G/LTE page, you can enable the
function for automatic creation of a mobile WAN connection upon powering the router on and
plugging a USB modem into the router.
Figure 124. The Connections Setup / Auto Configuration of 3G/LTE page.
If you want to enable the function for automatic creation of a mobile WAN connection, click the
ENABLE button. If needed, change the settings on this page.
Parameter
Set as default gateway
Create without IMSI
After specifying the needed parameters, click the APPLY button.
If the PIN code check for the SIM card inserted into the built-in LTE modem or the connected USB
modem is disabled, then an active WAN connection with the operator's settings will be
automatically created when powering the router on or plugging the USB modem into the router. The
connection will be displayed on the Connections Setup / WAN page.
Move the switch to the right to allow the router to use an
automatically created mobile WAN connection as the default
connection.
Move the switch to the left if you want the router to continue using
the existing default connection when automatically creating a
mobile WAN connection.
Move the switch to the right to enable automatic creation of a
mobile WAN connection without the operator's settings. This setting
will be useful if the code stored in the SIM card is unavailable.
Move the switch to the left to disable automatic creation of a mobile
WAN connection without the operator's settings.
Page 158 of 372
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
