D-Link DWR-980 User Manual page 350

DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Parameter
Type
Level
Server
Port
USB Storage
Save log to a USB
storage
Path
File name
The maximum size of
one file
Number of saved
archive files
After specifying the needed parameters, click the APPLY button.
Logging
Select a type of logging from the drop-down list.
Local: The system log is stored in the router's memory. When
•
this value is selected, the Server and Port fields are not
displayed.
Remote: The system log is sent to the remote host specified
•
in the Server field.
Remote and local: The system log is stored in the router's
•
memory and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
A port of the host specified in the Server field. By default, the
value 514 is specified.
Record to USB
If a USB storage is connected to the router, its name is displayed in
the field.
To safely disconnect the USB storage, click the UNMOUNT button.
Move the switch to the right so that the device could send the system
log to the USB storage connected to it. Upon that the Path, File
name, The maximum size of one file, and Number of saved
archive files fields are displayed.
Click the Search icon (
to locate the folder where system log files will be stored.
A name for system log files.
The maximum size (in kilobytes) of one system log file.
The maximum number of files allowed to be recorded on the USB
storage. When this number is exceeded, the file containing the oldest
data will be overwritten. The field is available for editing if the value
specified in the The maximum size of one file field is greater
than zero.
Page 350 of 372
Configuring via Web-based Interface
Description
) located to the right of the field in order