D-Link DWR-980 User Manual page 268

DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
In the Main Settings section, you can specify the following parameters:
Parameter
Interface
Lease time
Logging level
IP address
Mask
Ping
Figure 199. The page for adding an authorization server. The RADIUS server section.
In the RADIUS server section, you can specify the following parameters:
Parameter
Primary RADIUS server
address / Secondary
RADIUS server address
From the drop-down list, select an interface to be used for the
authorization server.
A VLAN which includes a separate LAN port or a Wi-Fi network
(see the VLAN section, page 242) is used as an interface for the
server.
The interval (in seconds) between sending authorization requests to
clients.
Select a type of messages and alerts/notifications to be logged.
Specify an IP address of the router to be used for authorized client
access.
Specify a subnet mask.
If the switch is moved to the right, the router responds to ping
requests by the IP address specified on this page. For security
reasons, it is recommended to disable this function.
Enter addresses of the primary and secondary RADIUS servers in the
relevant fields.
Page 268 of 372
Configuring via Web-based Interface
Description
Description