DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host and/or a USB storage connected to the router.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Figure 249. The System / Log page. The Settings tab.
Page 349 of 372
Configuring via Web-based Interface