Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
In order to connect your device to a private Ethernet line, on the Device mode page, from the
Connection method list, select the Ethernet value. Then from the Work mode list, select the
Router value. In this mode you can configure the WAN port, configure a WAN connection, set
your own settings for the wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to
connect an STB or VoIP phone, and set your own password for access to the web-based interface of
the device.
Figure 35. Selecting an operation mode. The Ethernet connection method.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the Mobile Internet value. In this mode you can
configure a 3G/LTE WAN connection, set your own settings for the wireless network in the
2.4GHz and 5GHz bands, and set your own password for access to the web-based interface of the
device.
Figure 36. Selecting an operation mode. The Mobile Internet connection method.
Page 53 of 372
Configuring via Web-based Interface
Advertisement
Table of Contents
