Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
In the Wireless Networks section, the list of available wireless networks is displayed. To view
the latest data on available wireless networks, click the UPDATE LIST button.
To connect to a wireless network from the list, select the needed network. Move the Network
options switch to the right to view more detailed information on the network to which the router
connects. If a password is required, enter it in the relevant field. Click the CONNECT button.
To connect to a hidden network, select the Connect to hidden network value from the
Connecting to network drop-down list. Enter the name of the network in the Network name
(SSID) field. If needed, fill in the BSSID field. Then select the needed type of authentication from
the Network authentication drop-down list.
When the Open or WEP authentication type is selected, the following settings are displayed on the
page:
Parameter
Enable encryption WEP
Default key ID
Encryption key WEP as
HEX
Encryption key
(1-4)
When the WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed, WPA3-SAE, or WPA2-
PSK/WPA3-SAE mixed authentication type is selected, the following fields are displayed:
Parameter
Password PSK
Encryption type
When you have configured the parameters, click the APPLY button.
When connecting to a wireless access point, the wireless channel of DWR-980 will switch to the
channel of the access point to which you have connected.
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the Default key ID drop-down list, the Encryption key WEP as
HEX switch, and four Encryption key fields are displayed on the
page.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields. Click the Show icon (
A password for WPA encryption. Click the Show icon (
display the entered key.
An encryption method: TKIP, AES, or TKIP+AES.
TKIP and TKIP+AES encryption types are not available for
WPA3-SAE and WPA2-PSK/WPA3-SAE mixed authentication
types.
Page 204 of 372
Configuring via Web-based Interface
Description
) to display the entered key.
Description
) to
Advertisement
Table of Contents
