Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Parameter
Port
Binding period
RTP DSCP / SIP DSCP
In the Port List section, you can change parameters of FXS ports of the router. To do this, select
the corresponding line in the table.
If the STUN value is selected from the Mode drop-down list, a port
of a STUN server to which a connection is established is displayed.
By default, the port 3478 is specified.
If the NAT Public IP value is selected from the Mode drop-down
list, a port of an upper-level router which exchanges service
messages with the SIP proxy server is displayed. By default, the port
5060 is specified.
The time interval between service messages (in seconds). Specify a
needed value.
Marking DSCP
Differentiated Services Codepoint.
Specify the required tags for DSCP traffic marking to change voice
traffic priority. The function should be supported by your ISP.
Figure 206. The window to change FXS port parameters.
Page 278 of 372
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
